Parametric modeling of steady-state gradient coil vibration: Resonance dynamics under variations in cylinder geometry

Gradient coil (GC) vibration is the root cause of many problems in MRI adversely affecting scanner performance, image quality, and acoustic noise levels. A critical issue is that GC vibration will be significantly increased close to any GC mechanical resonances. It is well known that altering the dimensions of a GC fundamentally affects the mechanical resonances excited by the GC windings. The precise nature of the effects (i.e., how the resonances are affected) is however not well understood. The purpose of the present paper is to study how the mechanical resonances excited by closed whole-body Z-gradient coils are affected by variations in cylinder geometry. A mathematical Z-gradient coil vibration model recently developed and validated by the authors is used to theoretically study the resonance dynamics under variation(s) in cylinder: (i) length, (ii) mean radius, and (iii) radial thickness. The forced-vibration response to Lorentz-force excitation is in each case analyzed in terms of the frequency response of the GC cylinder's displacement. In cases (i) and (ii), the qualitative dynamics are simple: reducing the cylinder length and/or mean radius causes all mechanical resonances to shift to higher frequencies. In case (iii), the qualitative dynamics are much more complicated with different resonances shifting in different directions and additional dependencies on the cylinder length. The more detailed dynamics are intricate owing to the fact that resonances shift at comparatively different rates and this leads to several novel and theoretically interesting predicted effects. Knowledge of these effects advance our understanding of the basic mechanics of GC vibration and offer practically useful insights into how such vibration may be passively reduced.     

Determination of Hg(II) in waters by on-line preconcentration using Cyanex 923 as a sorbent — Cold vapor atomic absorption spectrometry

Using a solid phase extraction mini-column home-made from a neutral extractant Cyanex 923, inorganic Hg could be on-line preconcentrated and simultaneously separated from methyl mercury. The preconcentrated Hg (II) was then eluted with 10% HNO₃ and subsequently reduced by NaBH₄ to form Hg vapor before determination by cold vapor atomic absorption spectrometry (CVAAS). Optimal conditions for and interferences on the Hg preconcentration and measurement were at 1% HCl, for a 25 mL sample uptake volume and a 10 mL min^− 1 sample loading rate. The detection limit was 0.2 ng L^− 1 and much lower than that of conventional method (around 15.8 ng L^− 1). The relative standard deviation (RSD) is 1.8% for measurements of 40 ng L^− 1 of Hg and the linear working curve is from 20 to 2000 ng L^− 1 (with a correlation coefficient of 0.9996). The method was applied in determination of inorganic Hg in city lake and deep well water (from Changchun, Jilin, China), and recovery test results for both samples were satisfactory.     

Highly porous PEEK and PEEK/HA scaffolds with Escherichia coli-derived recombinant BMP-2 and erythropoietin for enhanced osteogenesis and angiogenesis

The present study reports the results of structural and mechanical analysis, as well as proteins release kinetics and osteointegration in mice craniotomy model of highly porous PEEK (PolyEther Ether Ketone) and PEEK/HA (PolyEther Ether Ketone/HydroxyApatite) biomimetic scaffolds loaded with Escherichia coli-derived recombinant Bone Morphogenetic Protein-2 (BMP-2) and ErythroPOietin (EPO). Porous scaffolds were obtained by thermopressing with NaCl as a pore-forming filler. Two fractions of pore-forming filler were used to imitate natural trabecular bone tissue by making a preferential porosity using large fraction and creating an extended surface and special microrelief using small fraction. Hydroxyapatite (HA) was added up to 20% to activate bioinert PEEK providing loading of recombinant growth factors and osteointegration as well as sufficient level of mechanical properties imitating human trabecular bone. Unexpectedly, the non-activated PEEK produced by our technology was also able to spontaneously bind both BMP-2 and EPO. Loading of both BMP-2 and EPO to both types of implants resulted in enhanced neoosteogenesis and angiogenesis in a critical-size cranial defect model in mice in 3–6 weeks. Considering good mechanical characteristics and excellent osteoinductive and angiogenic properties, both materials in combination with BMP-2 and EPO can find their application in regenerative medicine.     

A comprehensive comparison between shortest-path HARP refinement,SinMod, and DENSEanalysis processing tools applied to CSPAMM and DENSE images

We addressed comprehensively the performance of Shortest-Path HARP Refinement (SP-HR), SinMod, and DENSEanalysis using 2D slices of synthetic CSPAMM and DENSE images with realistic contrasts obtained from 3D phantoms. The three motion estimation techniques were interrogated under ideal and no-ideal conditions (with MR induced artifacts, noise, and through-plane motion), considering several resolutions and noise levels. Under noisy conditions, and for isotropic pixel sizes of 1.5 mm and 3.0 mm in CSPAMM and DENSE images respectively, the nRMSE obtained for the circumferential and radial strain components were 10.7 ± 10.8% and 25.5 ± 14.8% using SP-HR, 11.9 ± 2.5% and 29.3 ± 6.5% using SinMod, and 6.4 ± 2.0% and 18.2 ± 4.6% using DENSEanalysis. Overall, the results showed that SP-HR tends to fail for large tissue motions, whereas SinMod and DENSEanalysis gave accurate displacement and strain field estimations, being the last which performed the best.     

Simple and Sensitive Multi-components Detection Using Synthetic Nitrogen-doped Carbon Dots Based on Soluble Starch

Journal of Fluorescence - Although carbon dots (CDs) as fluorescent sensors have been widely exploited, multi-component detection using CDs without tedious surface modification is always a...     

Multi-technique approach on the effect of surfactant concentrations on the thermal unfolding of rabbit serum albumin: Formation and solubilization of the protein aggregates

Effect of cationic surfactant, cetyltrimethylammonium bromide (CTAB) addition on the thermal denaturation of rabbit serum albumin (RSA) has been studied by employing small-angle neutron scattering (SANS), circular dichroism (CD), intrinsic fluorescence and ultra violet (UV) spectroscopy. The studies were performed at three different temperatures viz., 30, 50 and 70 °C and at two different concentrations of CTAB: the low concentration of CTAB used was 1 mM and the higher concentration was 80 mM (for SANS) and 20 mM (for CD, fluorescence and UV). A collective effect of high temperature and low concentration of CTAB led to the protein aggregation followed by solubilization of these aggregates at higher concentration of surfactant. At 1 mM CTAB and 30 °C, the protein–surfactant complex has a prolate ellipsoidal shape with semi-major axis of 88.9 Å and semi-minor axis of 19.6 Å which are slightly greater than the values of the native RSA. At 50 °C, the size of the semi-major axis increases while at 70 °C an increase in the size of both axes was found. The thermal outcome at higher concentration of CTAB (80 mM) was rather different. Higher concentration of CTAB unfolds the protein by the formation of micelle-like aggregates along the polypeptide chains of the protein and the complex was stabilized at higher temperatures, which was not found with lower concentration of CTAB. The CD results were found to be consistent with the SANS results, i.e., decrease in α-helicity of RSA was more when less amount of surfactant was present as compared to the system with higher surfactant concentration. In a similar fashion, results of relative fluorescence intensity (RFI) reveal that increase in temperature causes decrease in λ_max of native RSA as well as RSA + 1 mM CTAB, whereas the λ_max remains unchanged for RSA + 20 mM CTAB systems. That means the structure remains compact in presence of 20 mM CTAB while the structure becomes loose when low or zero amount of surfactant was present. The UV results indicate that the protein aggregation takes place in presence of low amount of CTAB and these aggregates become soluble at high concentration of CTAB.     

A novel electrochemical sensing strategy for rapid and ultrasensitive detection of Salmonella by rolling circle amplification and DNA–AuNPs probe

A novel electrochemical sensing strategy was developed for ultrasensitive and rapid detection of Salmonella by combining the rolling circle amplification with DNA–AuNPs probe. The target DNA could be specifically captured by probe 1 on the sensing interface. Then the circularization mixture was added to form a typical sandwich structure. In the presence of dNTPs and phi29 DNA polymerase, the RCA was initiated to produce micrometer-long single-strand DNA. Finally, the detection probe (DNA–AuNPs) could recognize RCA product to produce enzymatic electrochemical signal. Under optimal conditions, the calibration curve of synthetic target DNA had good linearity from 10 aM to 10 pM with a detection limit of 6.76 aM (S/N = 3). The developed method had been successfully applied to detect Salmonella as low as 6 CFU mL⁻¹ in real milk sample. This proposed strategy showed great potential for clinical diagnosis, food safety and environmental monitoring.     

Detection of motion through susceptibility fields in two-dimensional exchange diffusive–MASS experiments

We show that the off-diagonal coherence peaks in two-dimensional Fourier transform NMR spectroscopy of fluids contained in porous media undergoing magic angle sample spinning (MASS) arise from amplitude modulation of the fluid’s magnetization. The amplitude modulation originates from the combined effect of MASS and the molecular diffusion through the inhomogeneous magnetic fields created by the susceptibility contrasts in the porous medium. The magnitude of the off-diagonal peaks provides information on the porous medium’s structural length scales, which give rise to correlation length scales of the magnetic susceptibility.     

A convenient synthesis of 3-methyleneoxindoles: cytotoxic metabolites of indole-3-acetic acids

3-Methyleneoxindole is a cytotoxic metabolite of indole-3-acetic acid with potential for use in cancer therapy. This species and ring-substituted analogues are conveniently synthesised from the corresponding isatins via a Peterson olefination.